V. Others
* The InBody270 is manufactured according to the quality management procedure of InBody. InBody complies with the ISO9001 and
ISO13485 which are international quality management systems.
* This equipment satisfies the IEC60601-1 (EN60601-1), an international safety standard for electronic medical equipment. This equipment
a lso satisfies the IEC60601-1-2 (EN60601-1-2), an international standard for electromagnetic conformity.
A. Exterior and Functions
The following are the names and functions of each part of the InBody.
* Please inspect each component of the InBody270 for damage prior to installation.
1. Upper Part
Hand electrode pipe: The signal cables connecting to the electrode are in this pipe.
❶
Hand electrode: Examinee holds the hand electrode so that the 4 fingers wrap the surface of the
❷
Body: Connects the upper part of the equipment to the lower part.
❸
LCD screen: Shows each stage of the test, instructions, test results, etc. You can touch the screen to
❹
input the data required for the test, configure settings, or view test results.
Number keypad: Used for inputting age, height, and other number-based data.
❺
Setup button : Used for entering 'Settings' under the Administrator Menu when no one is on the footplate.
❻
Function button: Used for entering 'Troubleshooting' under the Administrator Menu when no one is on
❼
Print button: Used for printing the test results.
❽
Decimal point button: Used for inputting the decimal point in ID, height, age, or weight.
❾
Gender buttons: Used for selecting gender (Male or Female).
❿
Enter button: Used to finish inputting data or to save changes in Administrator Menu.
⓫
Delete button: Used for deleting inputted data.
⓬
❶
❷
26
bottom hand electrode while the thumb is placed on the oval electrode.
the footplate.
❸
❹
❺
❻
❼
❽
❾
❿
⓫
⓬