Grinding Adjustment - MACAP M42 Serie Instrucciones Originales

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

The automatic doser coffee-grinder model starts and stops automatically. Always switch off the appliance when not in use
and at the end of the day (position 0).
The grinding action of the timer grinder doser starts by turning the timer knob clockwise and it stops automatically at the
end of the time previously set. To stop the grinding process manually turn the timer knob anticlockwise.
9-4

GRINDING ADJUSTMENT

The appliance grinding is set in the factory at a coarseness that is suitable for many types of coffee that are on sale.
To adjust the grinding:
Stepped regulation (see figure F2)
Press the grinder pin and turn the nut in the direction you wish. When the
right regulation has been found, release the pin to block the regulation.
Check it is firmly blocked before turning the grinder on. Always regulate
the grinder when it is turned off and without any coffee inside. "+" shows
the rotation direction to increase the coarseness of the ground coffee. "-"
to decrease the coarseness of the ground coffee.
Micrometric regulation (see figure F3)
Turn the horizontal regulation knobs to change the coarseness of the
ground coffee. Micrometric regulation does not require blocking. Regulate
the grinder with the motor turned on if there is any coffee in the grinder,
with it turned off if it is empty. "+" shows the rotation direction to increase
the coarseness of the ground coffee. "- " to decrease the coarseness of the
ground coffee.
We recommend grinding and using a few grams of coffee each time you
change the coarseness, which will help remove the small amount of ground
coffee already inside the grinder.
If the coffee flow is too slow it means that the ground coffee is too fine, while if the flow is too fast it means the ground
coffee is too course. Many other factors can also affect the coffee flow, such as the amount of coffee, how much it has been
pressed, the appliance adjustment, the cleanliness of the filters and the climatic conditions.
9-5
ADJUSTING THE DOSE (see figure F4)
Pull the dosing lever to get the right dose of coffee.
The appliance is set by the manufacturer at approx. 7 grams per dose.
To change the dose, turn the knob inside the coffee dispenser in a clockwise
direction (smaller dose) or anti-clockwise direction (larger dose).
Never fill the coffee dispenser by more than 2/3rds.
F2 F2
F3 F3
F4 F4
23
ENGLISH

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mc42 serieM42m serieM42d serieM6d serie

Tabla de contenido