MACAP M42 Serie Instrucciones Originales página 27

10-6-6 (FAST PROGRAM)
The ( ) function is a quick programming mode which, if active, allows you to change the time of the programmed doses
without entering the programming menu. To enable or disable the ( ) function, proceed as follows: scroll through the
programming submenu (SETTINGS), turning the selection button. When the ( ) symbol appears, press it to enter. Turn
the selection button to enable or disable the function and then press it to return to the programming submenu. In the work
menu we can now use the ( ) function if active. In standard mode, view the dose to be changed. Turn the selection button
clockwise more than 180°, press it and then turn it to change the time. Press it again to exit quick programming. In push
and grind mode, the last dose used can be changed.
10-6-7 PASSWORD
The Password is a function that prevents access to unauthorised personnel.
Scroll through the programming submenu (SETTINGS), turning the selection button. When "Password" appears, press it
to enter. The cursor will be positioned above the first digit to be entered. Press the selection button to begin setting the
password. After setting each digit by turning the selection button, press it to go to the next digit.
Once the fourth digit has been set, the cursor will be positioned above "Save". Confirm "Save" to save the password and
exit or turn the button to "Exit" to abandon the procedure without saving and return to the programming submenu. If we
select "Save" without setting the four digits, the function will close without saving. The password can be renewed by setting
"----" and then saving as confirmation.
When a Password is set, it will be requested at every attempt to access the programming menu.
If the wrong Password is inserted, the wording "ERROR!" will appear on the display.
10-6-8 DD/MM/YY (DATE)
Within the programming submenu (SETTINGS), three dates can be saved and edited.
Scroll through the programming submenu, turning the selection button. When "DD/MM/YY" appears, press it to enter. The
cursor will be positioned above the first date to be entered. Press the selection button to begin setting it or turn the selection
button to move to the next date. After setting each digit by turning the selection button, press it to go to the next digit.
Once the date or dates have been set, move to "Save" to save and exit or turn the button to "Exit" to abandon the procedure
without saving and return to the programming submenu.
10-6-9 RELEASE
Within the programming submenu (SETTINGS), the software version used by the coffee grinder can also be viewed. Technical
support may ask for this information in the event of operating faults.
27
ENGLISH