Symbols And Formats; Intended Use - Dometic WAECO CoolAir RT880 Instrucciones De Instalación

All manuals and user guides at all-guides.com
CoolAir RT880, SP950
2.3

Symbols and formats

WARNING!
!
Safety instruction: Failure to observe this instruction can cause fatal or
serious injury.
CAUTION!
!
Safety instruction: Failure to observe this instruction can lead to injury.
NOTICE!
A
Failure to observe this instruction can cause material damage and impair
the function of the product.
NOTE
I
Supplementary information for operating the product.
➤ Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓ This symbol describes the result of an action.
fig. 1 5, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
3

Intended use

The installation kit (item no. 9100300036) enables the installation of an
air conditioning roof unit CoolAir RT880 (item no. 9100100044) or a Cool-
Air SP950 roof evaporator unit (item no. 9100100048) in a roof ventilation
opening (hatch) provided at the plant in a Scania (Highline and Topline)
driver cab.
A NOTICE!
 The RT880 and SP950 units are not suitable for installation in con-
struction machines, agricultural machines or similar equipment. They
will not work properly if exposed to strong vibrations.
 Operating the RT880 and SP950 units with voltages other than those
specified can result in damage to the devices.
NOTE
I
For cabs with a mechanical ventilation hatch two holders (fig. 5 5,
page 5; Scania no. 1533737), which are standard with the electrical ven-
tilation hatch, are still needed to fix the stationary air conditioner.
EN
Intended use
35