Skil 4285 Manual Original página 7

+&
Jig saw
INTRODUCTION
curved cuts with mitre angles to 45°
TECHNICAL DATA 1
TOOL ELEMENTS 2
A
B
C Ventilation slots
D
SAFETY
GENERAL SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all
instructions.
all warnings and instructions for future reference. The
power tool.
1) WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
Keep children and bystanders away while operating
a power tool.
2) ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
electric shock.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
Do not expose power tools to rain or wet conditions.
electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts.
electric shock.
4285
3) PERSONAL SAFETY
3
Save
4) POWER TOOL USE AND CARE
7
When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
shock.
If operating a power tool in a damp location is
unavoidable, use an earth leakage circuit breaker.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
personal injuries.
Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool.
switch or energising power tools that have the switch on
invites accidents.
Remove any adjusting key or wrench before turning
the power tool on.
Do not overreach. Keep proper footing and balance
at all times.
Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves away
from moving parts.
can be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
can reduce dust-related hazards.
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
designed.
Do not use the power tool if the switch does not turn
it on and off.
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's