Ega Master MASTEREX 79989 Manual De Instrucciones página 50

maintenance work!
and assembling the machine. Always do maintenance work outside areas
which are not exposed to explosion hazards.
work.
damages. Check the adherence to the technical specifications according to the
operation manual after each maintenance work. Only use genuine spare parts.
Otherwise you risk a decrease in machine performance and an increase in
maintenance work.
if non-original spare parts are used.
Maintenance Instruction
Generally, pneumatic machines need little maintenance. If the following rules are observed,
the machine will have the expected long life-time and high reliability. Service life and
performance of the machines are decisively determined by:
- The air purity,
- the lubrication conditions and maintenance,
- the regular control of the compressed air filter, as well as the regular checking of the machine
with regards to external damages.
Keep pneumatic pneumatic circular saw clean
Periodically blow out all air passages with dry compressed air. Never use dissolvers for
cleaning plastic parts. They could possibly dissolve or otherwise damage the material. Wear
safety goggles while using compressed air.
Disassembly and re-assembly of the machine have to be executed by qualified staff only.
Incorrect assembly can lead to danger of accident for the operator and to defects on the
machine.
Maintenance and repair
Disassembly and re-assembly should be done according to the exploded views, respectively
the sectional drawings (see repair instruction). All work regarding disassembly and re-assembly,
as well as maintenance and repair have to be executed by the manufacturer or skilled staff only.
50
WARNING – Danger of explosion! Generation of sparks during
Observe local safety regulations. Avoid use of force when disassembling
PROHIBITION –
Eating, drinking and smoking are forbidden during maintenance and repair
NOTICE – Only use original the manufacturer service tools, in order to avoid
IMPORTANT – There is no warranty for damages and liability is disclaimed,
DISASSEMBLY- RE-ASSEMBLY