Ega Master MASTEREX 79989 Manual De Instrucciones página 54

Preparing the pneumatic circular saw for the disassembly
- Separate the machine from the power supply and secure it against unintentional start.
- Disconnect the pneumatic hose.
- Remove the saw blade item 8 from the tool holder and store it safely (see fig. 1).
Preparing the pneumatic circular saw for the disassembly
- Remove 3x socket head screw item 3 together with 3 x spring washer item 4.
Take the modification kit item 2 from the circular saw item 1 (isee fig. 2).
54
DISASSEMBLY
Fig.1
Fig.2