Ega Master MASTEREX 79989 Manual De Instrucciones página 55

Disassembling the valve handle, assy
- Remove 4x socket head screw item 60.
- Take the valve handle, assy. item 2 from the pneumatic motor item 1 (see fig. 3).
- Remove snap ring item 59 and pull the lock washer item 54 together with the o-ring item 53
out of the valve handle item 41.
Collect the pressure spring item 52, die steel ball item 51 and the sealing ring item 49. Pull
the cylinder pin item 50 out of the valve seat item 55 (see fig. 4). Continue disassembling, if
necessary.
Fig.3
Fig.4
55