Devolo 5400 Manual página 82

a
Use this mode if you would rather not (or
cannot) route Ethernet cables in your
rooms. This procedure is described in Chap-
ter 3.3.3 Configuration as a repeater.
Access point mode
a
When you use the WiFi 6 Repeater 5400 as
an additional access point in your network,
you expand your existing network through
cabling.
a
To do so, connect the device directly to your
Internet access device (router). This proce-
dure is described in Chapter 3.3.4 Configu-
ration as an access point.
3.3.3Configuration as a repeater
1
Click Install as repeater.
2
The WiFi 6 Repeater 5400
searches for Wi-Fi networks in the vicinity.
Please select your Wi-Fi network from the list
and click Next.
automatically
If your Wi-Fi network does not appear in the
list, select a power socket closer to the WiFi
router/access point and refresh the list by
clicking on the arrow icon.
Initial use 24
devolo WiFi 6 Repeater 5400