Configuration - Devolo 5400 Manual

tect yourself against possible changes. Simply
disable the Enable Wi-Fi button option.
The operating button
WiFi 6 Repeater 5400 factory default settings.
Under Time zone, you can select the current time
zone, e.g. Europe/Berlin. The Time server (NTP)
option lets you specify a time server. A time server
is a server on the Internet whose task consists of
providing the exact time. Most time servers are
coupled with a radio clock. Select your time zone
and time server; the WiFi 6 Repeater 5400 auto-
matically switches between standard time and
summer time.
is enabled in the
Network configuration 48

4.7.3 Configuration

Saving the device configuration
To save the enabled configuration to your compu-
ter as a file, select the corresponding button in the

System Configuration
to File area. The system starts downloading the
current device configuration.
Restoring the device configuration
An existing configuration file can be sent to the
WiFi 6 Repeater 5400 in the System
tion area and enabled there. Select a suitable file
via the Select file ... button and start the operation
by clicking the Restore button.
Factory Settings
The WiFi 6 Repeater 5400 is reset to the original
factory defaults in the System
area with the Factory Reset option.
Doing so causes you to lose your personal
Wi-Fi settings. The last-assigned passwords
for the WiFi 6 Repeater 5400 are also reset.
For backup purposes, all active configuration set-
tings can be transmitted to your computer, stored
there as a file and
WiFi 6 Repeater 5400. This function can be useful
devolo WiFi 6 Repeater 5400

Save Configuration

Configura-

Configuration
reloaded into the