BRAND Transferpette-8 electronic Instrucciones De Manejo página 59

a.
3 x
b.
c.
1 x
d.
1 x
e.
1 x
f.
Hold
pressed
Transferpette® -8/-12 electronic 997200
a.
Call up menu selection: Pressing the menu key three
times takes you to the program selection.
ð
'Mode' flashes.
b.
Set PIPmix mode: Use one of the arrow keys to scroll
through the modes until 'PIPmix' appears.
ð
'Mode' continues to flash.
c.
Confirm PIPmix mode: Press 'Enter' key.
ð
The display now shows 'blo' for blow-out.
d.
Preparing for pipetting: Press the pipetting key once to
move the piston to its start position.
ð
The arrow in the display points upwards (aspiration).
e.
Aspirate liquid: Press the pipetting key once to aspirate
the liquid.
f.
Dispense liquid in PIPmix mode: Pressing and holding
the pipetting key causes the liquid to be alternately dis-
pensed and aspirated. The display alternately shows
the arrow symbol for aspiration or dispensing as well as
the number of cycles.
5 Pipetting programs
59
Operating manual