Draining The Float Bowl - iPower SUA8000iED Manual Del Propietário

DRAINING THE FLOAT BOWL

1. Loosen the screws at the side of the right
maintenance cover. Remove cover and set aside.
2. Turn the muti switch to the OFF position.
3. Locate the drain screw on the bottom of the
carburetor float bowl.
4. Place an appropriate gasoline container to catch
the drained fuel.
5. Loosen the float bowl drain screw and allow the
fuel to drain from the drain tube. Tighten the float
bowl drain screw.
DANGER
Explosion and Fire. Fuel and vapors are
extremely flammable and explosive.
Store fuel in a well ventilated area. Keep
fire and spark away. Failure to do so will
result in death or serious injury.
WARNING
Risk of Fire. Verify machine has properly
cooled before installing cover and
storing machine. Hot surfaces could
result in fire.
Drain Tube
Carburetor
Carburetor
Drain Screw
Page 30