Select the Fuel Source (Gasoline)
1. Make certain the propane tank is fully closed.
2. Add gasoline to the fuel tank.
3. Flip the fuel source switch on the side panel to the
gasoline position.
4. Turn the Multi-Switch to the"START" position.
5a. Recoil Start (Gasoline)
5a.1. Flip the engine switch to the "RUN"
Pull the starter cord slowly until resistance is felt
and then pull rapidly.
5a.2. When engine starts,turn the Multi-Switch in to the
"RUN" position.
5b. Electric Start (Gasoline)
5b.1 Flip and hold the switch on the "START"
position. Engine will crank and attempts to start.
When the engine starts, release the switch to the
"RUN"
5b.2. When engine starts,turn the Multi-Switch in to the
"RUN" position.
Page 18
position.
position.