JVC KV-M700 Manual De Instrucciones página 10

3
Monitor
MODE
4
Play back the external component.
To operate the external components, refer to the manuals on the connected
components.
5
Adjust the volume level on the car receiver.
To check the current input source
Press the CALL button on the remote controller. The current
input source appears on the screen for 5 seconds.
To turn off the power
Press the POWER button on the monitor or the
Notes:
When you watch the screen at an angle, the picture might not be clear. This is not a malfunction.
•
The finest picture can be seen when you watch the screen straight.
When JVC mobile video cassette recorder KZ-V10 is connected to the system, you can also operate
•
it by using the remote controller supplied with this system. For the operation, refer to the instructions
of KZ-V10.
10
Select the input source.
Remote
Press the MODE button on the monitor or the remote
controller to select the input source you want.
CH
Each time you press the button, the input source changes as
MODE
H/P H/P
VOL VOL
follows:
CH
The selected input source also appears on the screen for 5
seconds.
VIDEO 1 VIDEO 2
VIDEO1
EX: When VIDEO1 is selected.
(power) button on the remote controller.
SKIP
CALL
A.MEMO CALL
RM-RK37 RM-RK37