Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL THE UNIT (
h
orizontal exhaust installation only
7 . Reinstall and secure the faceplate to the unit using its
4 retaining screws (two per side) . Plug the blower cable to
its connector on faceplate (FIG . 29) .
CONNECT DUCTWORK
v
ertical exhaust installation only
Ducted Installation
Use 6-in . round or 3¼" x 10" metal duct to connect the
adapter damper on the top of the unit to the ductwork
above (FIG . 30) . Seal the joint using aluminum duct tape .
Non-Ducted Installation
A non-duct kit is required for this type of installation
(purchase separately, model number: HARKPM21) . To
install, follow the instructions packed with the kit .
'
)
cont
d
(
'
)
cont
d
HD1417
HJ0256
FIG. 29
FIG. 30
15
Publicidad
Tabla de contenido
