Standard Equipment; Preparing The Machine For Operation - Viking GE 150 Manual De Instrucciones

Wear hearing protection.
Wear safety glasses.
Wear work gloves.
Risk of injury:
Do not climb onto the
machine.
Risk of injury:
Never put your hands or any
other part of your body or
clothing into the feed chute
or ejection chute.
0478 201 9906 C - EN
All manuals and user guides at all-guides.com

6. Standard equipment

Item Designation
A
Basic unit with lower chute
B Wheel carrier
C Wheel axle
D
Wheel lock
E
Screw, M6 x 55
F
Hexagon nut
H
Quick fastener
I
Wheel
J Wheel cap
K Square nut
L
Washer Ø 17 mm
M
Bolt, M6 x 50
N
Discharge flap
O
Ejection chute extension
P Strip
Q Pin
R Torx screw P5 x 20
S
Upper chute
T
Safety screw
U
Torx screw P5 x 10
V
Combination spanner
Instruction manual
•
7. Preparing the machine for
operation
2
7.1 Attaching wheel axle and
Qty. wheels
1 ● Attach the wheel axle (C) with
1
wheel locks (D), bolts (E) and hexagon
nuts (F) to the wheel carrier (B) and
1
tighten using combination spanner (V)
2
(4 - 6 Nm).
2
● Push wheels (I) onto mounted wheel
2
axle.
2
Quick fasteners must be pushed
2
onto the wheel axle only to the
2
extent that the wheels can still turn
2
freely.
4
Quick fasteners are not reuseable
2
following removal.
1
● Push the quick fastener (H) onto the
1
wheel axle with the convex side facing
1
outwards.
2
● Press wheel caps (J) onto wheels.
3
1
4
2
1
1
3
41