Connecting The Power Cable; Switching On The Garden Shredder; Shredding; Switching Off The Garden Shredder - Viking GE 150 Manual De Instrucciones

GE 150, GE 250, GE 250 S:
This machine is intended for operation with
a power supply having a system
impedance of Z at the transfer point
max
(house connection) of maximum
0.443 ohms (at 50 Hz).
The user must ensure that the machine is
only operated with a power supply which
meets this requirement.
If necessary, this information can be
obtained from the local electric power
company.

10.2 Connecting the power cable

When choosing a power cable, take
account of all the information in the
"Electrical connection" section
( 10.1).
GE 150, GE 250, GE 250 S:
● Lift clip (1).
● Connect power cable connector.
● Release clip.
GE 260, GE 260 S:
● Connect the power cable connector to
the 5-pin mains plug on the machine.
10.3 Switching on the garden
shredder
There must be no shredding
material in the machine when it is
switched on as it may be expelled.
The blade disc locking device must
always be tilted back to the stop.
( 11.4)
0478 201 9906 C - EN
All manuals and user guides at all-guides.com
● Connect the power cable. (
● Press the green button (1) on the switch
(illus. shows GE 150, GE 250,
GE 250 S).
The garden shredder starts up.
Only begin to feed the shredding
material once the motor has
reached the maximum speed (idling
speed).
10.4 Switching off the garden
shredder
9
Risk of injury!
Do not step into the ejection area
when switching off!
Stand to the side of the machine to
do so.
Beware of the work tools running
on for several seconds before
coming to a standstill after
switching off the motor.
● Press the red button (1) on the switch
(illus. shows GE 150, GE 250,
GE 250 S).
The garden shredder motor is switched off
and braked automatically.
Only switch off the motor when
there is no longer any shredding
10
material in the machine. Otherwise,
the blade disc may become blocked
when operation is resumed.
10.2)
10.5 Checking the rotational direction
of the blade discs
On the GE 260 and GE 260 S
models, the rotational direction of
the blade disc must be checked
before commencing work (feeding).
Risk of injury:
Always wear safety glasses when
performing the check.
● Switch on garden shredder. (
● Switch off the garden shredder.
11
( 10.4)
● Press the splash guard inwards and
look at the blade disc from above
through the feed opening:
The correct rotational direction of the
blade disc is anti-clockwise.
10.6 Changing the rotational
direction of the blade discs
In the case of incorrect rotational
direction (clockwise) of the blade
disc, the rotational direction must
be changed on the GE 260 and
GE 260 S models.
The rotational direction of the blade discs
can be changed by reversing the polarity
of the phase rotation device on the mains
plug.
● Using a screwdriver (U), turn the phase
rotation device (1) 180° clockwise or
anti-clockwise.
10.3)
12
45