Project Source 1076627 Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
1b. Optional deck plate Installation:
Shut off the water supply. Remove the old faucet.
Place the deck plate (D) and the gasket (E) on
the bottom of the new faucet assembly (A).
Insert the faucet assembly (A) through the hole
in the deck plate (D).
Note: A silicone is required under the gasket (E).
2. From underneath the sink, secure the faucet
assembly to the sink with the quick install nut (B).
Push the quick install nut (B) up over the threads
until it stops against the bottom of the sink, then
hand turn (clockwise) to tighten (Fig 1).
1b
2
Push
1
up
4
A
D
E
B
Sink
1
Push
2
up
B
Screw
Fig 1
Sink
B
Sink
3
B