ivory Neo Line SL411E Instrucciones De Uso página 42

prevent them entering the internal parts of the handpiece.
CAUTION!
The saline solution is extremely aggressive and can rust
steels in no time.
Thoroughly clean the surfaces using a clean cloth
soaked in a suitable substance. Also use a medium hard
toothbrush and brush under running hot tap water 30°C
± 5°C (86°F ± 10°F).
- Cleaning the spray nozzles
The use of hard, unfiltered water prematurely clogs the
tubes and spray diffusers. To remove any encrustations in
the three spray nozzles, use the special probe. Using the
supplied cleaning wire, carefully remove impurities and
deposits from the spray nozzles. Clean and disinfect the
cleaning thread before storing it.
40
Eng
CAUTION!
Do not force the brush into the conduit. Damage to the
conduit can change the direction of spray with respect to
the bur and reduce the effectiveness of cooling.
- Cleaning the optic fibre glass (if fitted)
Clean the glass of the optic fibre with a pad damped in
alcohol. Remove all residual impurities.