Safety Rules; General Warnings - BFT MIG 2 Instrucciones De Uso Y De Instalacion

Thank you for buying this product, our company is sure that you will be more than satisfied with the productís perfor-
mance.
This manual is based on the knowledge that it is in the interest of the customer to keep the equipment running in perfect
working order and this manual therefore includes the rules for correct operation and equipment maintenance.
This warning symbol is accompanied by important messages regarding your safety.
Read the safety regulations carefully and observe any recommendations to avoid potential hazards and to safe-
guard your health and safety. In this manual you will find this symbol together with one of the following key
words:
CAUTION - For warnings intended to prevent potential damage to the equipment which may also involve the safety
of the operator.
DANGER - For warnings which highlight potential hazards for the safety of the operator or other individuals directly
or indirectly involved.

GENERAL WARNINGS

This product has been designed to make operation as safe as possible.
Caution, however, is the key to accident prevention.
Keep this manual in a safe place which is known to any individual who may need to use it.
This product should only be used for door and gate automations.
Any other use will be considered in violation of the intended uses of the Manufacturer who therefore is relieved of liabi-
lity for any damages to objects or to the product or for injury caused by inappropriate use. It should be remembered that
the inappropriate use of the product also means an acceptance of resulting liability. The User should observe current
safety and accident prevention regulations, for example, in Italy, the UNI 8612 standard.
Any arbitrary modifications made to this product, will relieve the Manufacturer of any liability for resulting damage or
injury.
The Manufacturer and any parts of its distribution network, including not only national, regional or local dealers, decline
all responsibility for any damage caused by the anomalous functioning of any parts and/or components which have not
been approved of by the Manufacturer. These include parts used for installation, maintenance and/or repairs of the pro-
duct made or sold by the Manufacturer. No guarantee will be issued or considered valid for the product made or sold by
the Manufacturer in the event of damage caused by the anomalous functioning of parts and/or components which have
not been approved of by the Manufacturer.
FAMILIARIZATION WITH THE EQUIPMENT
Make sure that this manual has been fully read and understood before storing it in a safe place. It should be read inde-
pendently of previous experience since this manual is an integral part of the manual and therefore the User should make
sure that he is familiar with all its contents. A few minutes given to the reading of this manual, will contribute to safer
operation and will help save unnecessary time and effort later.
Read this manual carefully before installation, start-up, maintenance and any other operations carried out on the equip-
ment. Observe the following instructions and warnings carefully:
Pay attention to any plates attached to the equipment, and replace these if they are lost or illegible.
The installation of the equipment should be entrusted to skilled personnel who have been adequately trained in installa-
tion and who are familiar with all the safety regulations. Do not oil or grease the parts while the automation is supplied
with electricity.
DANGER: repairs and adjustments must not be carried out on the equipment when it is supplied with electricity
unless all the necessary safety measures have been taken to avoid accidents.
All the moving parts should be suitably protected.
GB

SAFETY RULES

4