Kenmore KW3050 Manual De Uso Y Cuidado página 20

INSTALLING & CLEANING EXHAUST FILTER
1. Verify that the power cord is
disconnected from the outlet.
2. Unlock the exhaust filter door by sliding
the locking tab upwards to the release.
Pull the door out.
3. Remove the exhaust filter from the
vacuum and clean by gently tapping
or brushing off dirt. For optimal
performance it is recommended to
replace the old filter with a new filter
regularly.
4. Install the cleaned or new filter. Then
insert the filter door tabs into the upper
slots and lock the filter door into place.
- 20 -