Operating Instructions; Dry Vacuuming Operation - Kenmore KW3050 Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

13. Choose the desired accessories and/
or the telescoping wand, then insert
onto the end of the hose. The air flow
regulation on the handle allows you
to manually change the amount of
vacuum suction. When the two triangles
are aligned, suction will be weakest.
For best cleaning results, fully close the
air flow regulation.
WARNING
Be sure to read, understand, and apply
information entitled 'important safety
instructions'. Do not vacuum in areas
with flammable gases, vapors, or
explosive dusts in the air. Flammable
gases or vapors include but are not
limited to: lighter fluid, solvent type
cleaners, oil-based paints, gasoline,
alcohol, or aerosol sprays. Explosive
dusts include but are not limited to:
coal, magnesium, grain, or gun powder.
To reduce the risk of health hazards
from vapors or dust, do not vacuum
toxic materials.
WARNING
Do not plug the power cord into
electrical supply. Make sure the plug
is disconnected before changing the
filters.
ASSEMBLY INSTRUCTIONS

OPERATING INSTRUCTIONS

DRY VACUUMING OPERATION

CAUTION
Do not vacuum drywall dust or fireplace
soot or ash with standard wet/dry filter.
This is a very fine dust which will not
be captured by the filter and may cause
damage to motor. When vacuuming
fine dust use a fine dust filter (sold
separately).
NOTE:
To reduce the risk of electric
shock, this vacuum cleaner has a polarized
plug; one blade is wider than the other.
This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install
the proper outlet. Do not change the plug
in any way.
- 12 -

Publicidad

Tabla de contenido
loading

Tabla de contenido