Machine Unpackaging; Battery Installation - Lavorwash SWL R 950 Instrucciones Para El Usuario

1. Please carefully check whether there is damage on the packing box of the machine. If there is,
please immediately reflect to the carrier.
2. Before unpackaging the machine, please dismantle the cargo fixed parts and ropes fixing the
machine on the pallet.
Note: If no handling machinery is used, please do not push the machine directly so as to avoid
machine damage.
Note: To avoid machine damage, please install the battery after unloading the machine from the
pallet.
Warning: fire or explosion hazard. Please be away from spark or open fire. The battery
cover must be kept open when charging.
For safety: Please wear protective gloves and eye protectors when treating the battery and battery
wiring when repairing the machine. A void contacting the battery liquid acid.
1. Stop and place the machine on the level ground and take out the key.
2. install the battery in the battery cabin and connect this to the machine according to the leaft
enclosed to the instraction manual
Warning: an incorrect connection of the batteries can seriously damage the
electronic components of the machine)
3. Before connecting the battery, please firstly ensure whether the electrodes and electric
terminals are clean. Use electrode cleaning fluid and wire brush as required.
Explanation: Paint a thin layer of specific lubricating oil on the connected wiring to avoid battery
corrosion.
EN

7 MACHINE UNPACKAGING

8 BATTERY INSTALLATION

21