Remote Control - Avidsen 100731 Manual De Instrucciones

LED LIGHT
• Flashes continuously: self-testing.
• Flashes once: an intruder has been detected.
• Flashes twice: self-test completed; enters into operating mode.
• Flashing once every 3 seconds: low battery. Replace it. In addition to visual feedback, the central
unit will send an SMS alert about battery status.
Door/window magnetic contact
The door/window contact can be installed on doors, windows and other opening/closing items.
The sensor will send signals to the central unit when the magnet is separated from the tran-
smitter. The anti-tamper device will trigger the alarm in case of attempts to remove the door/
window contact cover.
LED LIGHT
• Flashes once: the door or window is open and the transmitter will send a signal to the central unit.
• Flashes rapidly: low battery. Replace it. In addition to visual feedback, the central unit will send
an SMS alert about battery status.

REMOTE CONTROL

You can control the central unit and make all settings remotely by:
1) SMS
2) CALL
3) IOS/ANDROID APP
Procedure 1 – SMS
IMPORTANT: Associate the telephone number/s (max 5) before checking and interact with the
central unit via SMS, call and/or APP.
The operations that can be carried out via SMS are listed below (the central unit will respond
to acknowledge receipt every time that a command is entered).
Disarming
Send an SMS containing 0
Arming
Send an SMS containing 1
Home Mode
Send an SMS containing 2
12
GB