Resetting Factory Settings - Avidsen 100731 Manual De Instrucciones

Telephone – send command (SMS)
Send an SMS containing 00
Cycle of calls
Telephone – send command (SMS)
Send an SMS containing 20
Copy, paste and edit the reply message (do
not enter spaces)
Cycle of calls:3
Delete all accessories:
Enter an SMS containing 21

Resetting factory settings

Send an SMS containing 0000
NOTE: All system settings will be restored to default values. Any accessory and stored phone
numbers will be deleted.
Procedure 2 – Phone call
IMPORTANT: before calling the central unit, make sure it has been paired with the phone number,
according to the procedure described in "Storing telephone numbers"
When an alarm is activated, the central unit dials the pre-stored telephone numbers, alerting the
user with a voice message. The user can interact with the central unit following the instructions
given in the Table.
Command
0
1
*
6
9
#
You can also control the central unit by directly dialling the identifying phone number (SIM number).
The central unit will respond for example
with the following SMS:
System Disarmed
AC power: on
The central unit will answer for example
with the following SMS:
Cycle of calls:5
Function
Disarm
Arm
Audio Monitoring
Siren OFF
Siren ON
End call
Central unit - Answer (SMS)
Central unit - Answer (SMS)
OK
Answer
The voice guidance responds
with System disarmed
The voice guidance responds
with System armed
GB
15