Electrical Information - Oster OS-BOV70DC Manual De Instrucciones

WARNING: Disconnect the appliance from the electricity
supply, remove the oven door (as described above), as well as
the oven shelves.
Remove the glass cover that protects the light bulb by turning it
anti-clockwise. Fig. 9 (A)
Unscrew the old light bulb and dispose of it safely and
ecologically, change it for one as specifi ed in the Specifi cations
and replace the cover.
NOTE – The glass cover may be tight and, therefore, may need
a grip to release it.
CARE AND REPLACEMENT OF THE CATALYTIC COVERING
(When assembled, the covering is not covered by the appliance
guarantee).
In order to keep the covering "always clean" effi ciently, the
oven must be heated to a minimum of 200 ºC whenever there
are stubborn stains, so that they do not become permanent.
If the covering becomes black and shiny, they must be
replaced. Remove all the internal accessories to facilitate the
replacement of the covering.
The replacement covering may be bought directly from the
Manufacturer's Replacement Part Department (see details
included in the cover). Indicate the reference numbers of the
product type described in the specifi cations plate and/or the
series number of the appliance on ordering.
SPECIFICATIONS
INTERIOR DIMENSIONS
Height: 354.7 mm
Width: 4 8 7.5 mm
Depth: 407.2 mm
Useful volume: 70 litres

ELECTRICAL INFORMATION

Nominal voltage:
220 V - 240 V ~ 50 Hz-60 Hz
POWER ABSORPTION
Top heating element
Grill heating element
Bottom heating element
Convection motor
Cooling fan
Oven lamp
Max. power
Network power cable:
3 x 1.5 mm type H05VV-F
2
Oven light bulb:
25 W / 300 ºC screw type G9
The Manufacturer declines all liability for damage caused to
persons and objects due to incorrect or improper installation
of the appliance.
The Manufacturer reserves the right to make any modifi cation
it believes necessary and useful to the products, without prior
warning.
20
English-10
950 W
2000 W
1100 W
19 /34 W
13/20(30) W
25 W
3000 /3200 W