Default Values - ABB DELTAplus Instrucciones De Instalación

Default values

The table below lists the default values. Check if any of them needs to be
changed, see Settings for instructions.
Parameter
VT ratio (Ut)
Transformer connected only
CT ratio (Ct)
Transformer connected only
Pulse frequency (P)
[imp/kWh]
Address (Adr)
Baud rate (Bd)
M-Bus only
Write protection
Meters with internal clock only
Direct connected
meters
-
-
100
82
Value
Transformer connected
meters
1
1
10
0
2400
Open