ABB DELTAplus Instrucciones De Instalación página 88

Changing values
The function is activated when the button is released. For an overview of
the setting flow, please see fig. 12 back in the instruction.
When this blinking symbol is shown in the display the DELTAplus
Meter expect you to set something.
Description of procedure for changing values assumes that the meter
from the beginning is in normal-, alternative- or instrumentation mode,
and that the meter has default settings.
Changing CT ratio (Ct – – – –)
(Transformer connected meters only)
Step Action
S
1 Press
2 Press S
3 Press
Sc
S
4 Press
5 Repeat step 3-5
for the rest of digits.
LSc
6 Press
Please also see examples further ahead in the manual.
Display shows
x 1 Ct 1
x 1 Ct – – – 0
x n Ct – – – n
x 1 Ct – – 0 n
Ct nnnn
To SET mode.
Activates SET mode, hand
symbol starts to blink.
Changes the value of the
digit (increased by 1 for
each pressing).
Accepts value and
activates the next digit.
Back to normal mode.
86
Result