Quick Connect Nozzles; Using The Accessories - Kärcher G 3200 Q Manual Del Operador

Quick connect nozzles

The color-coded quick connect nozzles provide a
wide array of spray widths from 15° to 65° and are
easily accessible when placed in the convenient
nozzle holder.
15° spray angle = Yellow nozzle
For dirt accumulation over a surface.
25° spray angle = Green nozzle
For dirt accumulation over a large surface.
40° spray angle = White nozzle
For moderate dirt accumulation over a large
surface.
Detergents can only be applied with the black
detergent nozzle.
STEP 1:
Install the black detergent nozzle for deter-
gent application at low pressure.
STEP 2:
Fill the tank with Kärcher detergent diluted
per manufacturer's instructions.

USING THE ACCESSORIES

WORKING WITH DETERGENTS
65° spray angle = Black nozzle
For operating with detergents or cleaning with
low pressure.
CAUTION
High pressure in nozzle area. Risk of injury
caused by improperly locked nozzle.
▄ Make sure you hear the "click" when inserting
the nozzle tip into the quick connection.
▄ Pull the nozzle to make sure it is seated
properly before operating your unit. (See
OPERATING INSTRUCTIONS: Step 1)
WARNING
To avoid serious injury never point spray
nozzle at yourself, other persons, or animals.
STEP 3:
With the engine running, pull trigger to operate
unit.
Liquid detergent is drawn into the unit and
mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on surface.
STEP 4:
Always draw fresh water through the deter-
gent suction tube when the cleaning job is
done, to rinse/flush any remaining detergents
from the injection system.
See Cleaning Tips for specific information on
how to clean different surfaces.
11