Dräger X-am 2800 Instrucciones De Uso página 46

en |
Operation
WARNING
Risk of explosion
The use of an unsuitable smartphone in an explosion-hazard area may lead to
the ignition of flammable or explosive atmospheres.
► The smartphone must be suitable and approved for use in explosion-hazard
areas.
®
The Bluetooth
be used in countries for which approval is available. Contact Dräger if you have
any questions about availability.
Contamination of the gas detector or shielding elements (e.g. case) can
reduce the Bluetooth
Failure of the Bluetooth communication of the gas detector is to be expected
in the vicinity of strong transmitters in the range of the 2.4 GHz band.
When connecting a new smartphone, the connection that is currently stored is
deleted during this process.
1. Switch on the gas detector.
2. Call up the Quick menu: Press
3. Select and confirm the Bluetooth® connection.
4. Select the gas detector on the smartphone:
a. Short name of the gas detector in the Android/iOS Bluetooth
b. Part number and serial number in optional Dräger app.
A 6-digit number is displayed on the smartphone and on the gas
detector.
5. Check that the numeric code on both devices match and, if it matches,
confirm it on both devices. The devices must be coupled within 20 s
otherwise the numeric code will become invalid.
✓ Coupling of the devices is complete.
Once a connection has been successfully established, it is saved and the
two devices are automatically connected in the future (adjustable via the CC-
Vision PC software).
If the connection is lost, the gas detector automatically tries to establish a
new connection.
46
feature is not part of the technical suitability test and may only
®
range.
3x in measuring mode.
®
menu.
®
X-am 2800