Gas Fry-Top With Thermostatic Valve - Fagor FT-G905 Instrucciones De Instalación, Uso Y Mantenimiento

4.5.2

Gas Fry-top with thermostatic valve

1. Disconnect the gas supply to the appliance if connected (Any change to the conditions of the
gas circuit must be carried out by an AUTHORISED TECHNICIAN).
2. Burner conversión:
a. Remove the burner injectors and replace with the correct model according to the gas to
3. Pilot conversión:
a. Release the ignition pipe.
b. Undo the pilot unit.
c. Remove the pilot injectors and replace with the correct model according to the gas to be
d. Replace the pilot unit and the ignition pipe.
be used (table 3).
b. Set the air control to position H (table 3) depending on the gas to be used.
used (table 3).
R
air