Faults, Alarms And Breakdowns; Recycling The Product - Fagor CP-G905 Instrucciones De Instalación, Uso Y Mantenimiento

Ocultar thumbs Ver también para CP-G905:

Tabla de contenido

Idiomas disponibles



Switch off the mains power supply.

6. FAULTS, ALARMS AND BREAKDOWNS

The steps to be followed in the event of a fault or operating error are described below. The possible causes

and possible solutions are listed in the following table. In the event of doubt, or if you are unable to resolve

the problem, please contact the technical service.

Do not handle electrical components, as there is a risk of death as the

components are live.

Problem

Smell of gas

Ignition pilot does not light.

Ignition pilot goes out.

Flame is yellow.

El cocedor de pasta no calienta

NOTE: If a fault occurs and is not listed in the above table, please call the

technical service. The manufacturer reserves the right to modify the technical

characteristics with prior warning.

The European standard 2012/19/EU on the disposal of electrical and electronic appliances,

must not be disposed of in the same way as solid urban waste. Old appliances must be

disposed of separately to optimise the percentage of materials recovered and recycled and to

prevent potential damage to health and to the environment. The crossed-out bin symbol is

displayed on all the products to remind users of their obligation to dispose of the product

separately. For further information on the correct disposal of electrical kitchen appliances,

users may refer to the relevant public authority or other retailers.

Cause

Occasional gas leak caused by flame

going out.

Spark generation does not work.

Air in pipes due to long period of

inactivity.

Thermocouple not heated enough.

Dirty burner

Valve tap broken

Limiting thermostat trips

Insufficient gas pressure.

Solution

Close the gas supply and ventilate the

premises.

Turn on the pasta cooker manually.