HOLZMANN MASCHINEN BBS810SMART-G Instrucciones De Servicio página 43

HOLZMANN Maschinen GmbH www.holzmann-maschinen.at
6. Assembly scale for height
adjustment
Assemble the square bar to the
machine, assemble the scale pointer
assembly to this bar.
7. Put the sawhead on the track and
make final adjustments for ensuring
the parallel and height of the track.
Then tighten the screws.
Install the two pieces anti-sway bar on
8.
both left and right machine bracket.
9. Assembly the end stops on the
tracks
Fasten the four end stops (2x38, 39,
40) with screws and nuts (24) to
the ends of the tracks as shown.
ASSEMBLY
43
BB810SMART-G