Permobil ROHO AGILITY Back Support Fixed Hardware Manual Del Operador página 9

AGILITY Installation, continued
Complete Attachment - Option A and Option B
6. Finger-tighten the width/height adjustment
nuts.
ROHO AGILITY Fixed Hardware Operation Manual
7. Complete attachment on both sides:
a. Use a tape measure to make sure the
pivoting bands are at the same height on
the wheelchair canes.
b. Tighten the bolts with the Allen wrench
until snug + one-quarter turn.
Note: If a torque wrench is available,
tighten to no more than 40 inch-pounds
(4.5 Newton-meters).
c. If you need to adjust the height, see
"Height Adjustment".
Warning: Once installation and width adjustment is complete, make sure all hardware is
securely tightened before the individual is seated in the wheelchair. Refer to the recommended
torque specifications.
7