Climate Classes; Sufficient Ventilation; Levelling; Use - essentiel b ERL170-55hib1 Instrucciones De Uso

Climate classes
Install the appliance only in a location where the room temperature matches the climate class for
which it was designed (see table below) .
The climate class is on the rating plate located on the outside of the appliance.
The table below shows the correct room temperature for each climate class:
Your refrigerator is "N/ST/T" classified.If the room temperature is below or above the indicated
room temperature, the performance of your refrigerator may be affected, and your food may spoil.
Sufficient ventilation
Make sure that air can always circulate freely around the appliance.
•
For the appliance to run properly, do not obstruct the vents and leave a space of at least 20 cm
•
above the appliance, 10 cm between the back and the wall and 2 cm on each side.
If your appliance is to be installed next to another refrigerator or freezer, make sure the appliances
•
are not touching each other. This is to prevent condensation from forming on the outside.

Levelling

For vibration-free operation, the appliance needs to
be in a level position. To do this, adjust the height
adjustable feet at the front to properly level and
balance the appliance.

use

Getting started
Before plugging the appliance in to the electrical outlet for the first time, please let the
•
appliance rest for two hours , to allow the refrigerant gas to stabilize in the compressor.
Not respecting this waiting period may damage the compressor.
Plug the appliance into an earthed socket.
•
18

Climate classes

SN
N
ST
T
Room temperature
From +10°C to +32°C
+16 to +32°C
+16 to +38°C
From +16 to +43°C