5 ASSEMBLY
5.1
8
Assembly
502641-01
502642-01
502643-01
502644-01
Assembly
–
Switch off the ignition.
–
6
Remove screws
.
–
Completely unscrew adjusting screw
Info
The adjusting screw is fastened to the headlight mask
by a ball head holder.
Do not pull the adjusting screw out of the ball head
adjuster.
–
Swivel the headlight mask forwards slightly and disconnect
8
connector
.
–
Remove the headlight.
–
9
Remove screws
.
–
bk
Remove screws
.
–
bl
Remove screws
.
–
Hold turn signal in the area
direction of travel.
The cover is detached as illustrated.
–
Repeat the operation on the opposite side.
–
Remove the cover.
7
.
A
and carefully press against the