5 ASSEMBLY
10
–
Mount right bushing
502647-01
–
Mount and tighten bottom retaining bracket
(both included).
Guideline
Screw, retaining
bracket
–
Position the USB charging socket
–
Mount and tighten cable ties
502648-01
–
Plug in connector
–
Position the headlight mask.
–
Mount adjusting screw
502649-01
–
Mount and tighten screws
Guideline
Screw, retaining
bracket
–
Position the cable of the USB charging socket behind the
headlight and secure it with a cable tie if necessary.
502650-01
Final steps
–
Check headlight setting (see Owner's Manual).
–
Adjust the headlight range of the headlight (see Owner's Manu-
al).
–
Check that the lighting is functioning properly.
4
(included).
1
M5
5 Nm (3.7 lbf ft)
2
on the retaining bracket.
5
(included).
8
.
7
.
6
.
M5
5 Nm (3.7 lbf ft)
3
with screw
Loctite
®
243™