NORAUTO NS-318 DBT Manual De Instrucciones página 127

Automatic scanning and saving of stations
EN
In the radio mode, with functions TA, AF & PTY turned off, long
press TFT screen icon to start scanning frequencies and
check signal strength until tuning is complete.
Short press TFT screen icon again, you can browse each
stored station about five seconds.
During this process, click TFT screen icon again to end this
function.
Manual scanning and saving of stations
To activate the manual scan, click TFT screen icon.
During the manual scanning process, repeatedly click TFT
icon upwaRadio data system or process, repeatedly
downwaRadio data system to the desired frequency.
Controlling the Radio data system
Overview of Radio data system functions
The Radio Data System (Radio data system) is a service, which
makes it possible for FM stations to broadcast other digital
information together with the standard program signal. Some of
them are listed below. It depends on the specific station, which
data is used for transmission and when. The device monitors the
received data and reacts to it based on its settings.
Important note
The Radio data system function only works in countries or areas
that have Radio data system broadcasting. Not all countries or
127