DeWalt DW077 Manual De Instrucciones página 13

All manuals and user guides at all-guides.com
laser is set up too far out of level, it will beep when it reaches the
limit of its leveling range. No damage will be done to the laser,
but it will not operate in an "out of level" condition.
3. Secure the laser to the tripod by screwing the threaded knob on
the tripod into the female thread on the bottom of the laser.
NOTE: Be sure that the tripod you are working with has a 5/8"—11
threaded screw to ensure secure mounting.
4. Turn the laser on and adjust the rotation speed and controls as
desired.
Using the Laser on a Floor
the laser level can be positioned directly on the floor for leveling and
plumbing applications such as framing walls.
1. Place the laser on a relatively smooth and level surface where it
will not be disturbed.
2. Position the laser for a level or plumb setting as shown.
3. Turn the laser on and adjust the rotation speed and controls as
desired.
NOTE: The laser will be easier to set up for wall applications if the
rotation speed is set to 0 rpms and if the remote control is used to
PLUMB
MODE
line up the laser with control marks. The remote allows one person
to set up the laser.
Using the Laser with a Wall Mount
The DW077 Rotary Laser has been designed to work with an
accessory Wall Mount (DW0770). It can be used for attaching the
tool to track or celing angle (mould) and to aid in acoustical ceiling
installation. Follow the directions below for using the wall mount.
CAUTION: Before attaching the laser level to wall track or ceil-
ing angle, be sure that the track or angle is properly secured.
1. Attach the Laser to the accessory wall mount.
2. With the wall mount measuring scale (O) facing you, rotate the
wall mount clamp locking knob (P) towards you to open the
clamp jaws.
3. Position the clamp jaws around the wall track or ceiling angle
and as shown rotate the wall mount clamp locking knob away
from you to close the clamp jaws shut on the track. Be sure that
the wall mount clamp locking knob is securely locked before
proceding.
LEVEL P
MODE
9
Q
O
P