All manuals and user guides at all-guides.com
Detector Service
Except for batteries, there are no user serviceable parts in the
Digital Laser Detector. Do not disassemble the unit. Unauthorized
tampering with the laser detector will void all warranties.
Detector Troubleshooting
THE DETECTOR WILL NOT TURN ON
• Press and release the power/volume button.
• Check to see that the battery is in place and in the proper
position.
• If the detector is very cold, allow it to warm up in a heated area.
• Replace the 9 volt battery. Turn the unit on.
• If the detector still does not turn on, take the detector to a
D
WALT service center.
E
THE DETECTOR'S SPEAKER MAKES NO SOUND
• Ensure that the detector is on.
• Press the power/volume button. It will toggle from high, to low,
to mute.
• Ensure that the rotary laser is spinning and that it is emitting a
laser beam.
• If the detector is still not making any sound, take it to a D
service center.
THE DETECTOR IS NOT RESPONDING TO MY STATIONARY
LASER LEVEL
• The D
WALT Digital Laser Detector has been designed to work
E
only with rotary lasers.
THE DETECTOR IS GIVING OFF A TONE BUT THE LCD DIS-
PLAY WINDOW IS NOT FUNCTIONING.
• If the detector is very cold, allow it to warm up in a heated area.
• If the LCD display window is still not functioning, take the detec-
tor to a D
WALT service center.
E
BEAM
APPROX. 50 FT.
LASER UNIT ROTATED 180˚
BEAM
APPROX. 50 FT.
LASER MAINTENANCE
1. Under some conditions, the glass lens inside the rotary head
may collect some dirt or debris. This will affect beam quality and
operating range. the lens should be cleaned with a cotton swab
moistened with water as shown.
WALT
E
2. The flexible rubber shield can be cleaned with a wet lint-free cloth
such as a cotton cloth. USE WATER ONLY — DO NOT use
cleansers or solvents. Allow the unit to air dry before storing.
3. To maintain the accuracy of your work, check the calibration of
the laser often. See the "Field Calibration Check" section of this
manual.
4. Calibration checks and other maintenance repairs can be per-
formed by D
WALT service centers. Two free calibration checks
E
are included under the D
tract.
3. When the laser is not in use, store it in the kit box provided.
14
WALT One Year Free Service Con-
E