Using The Wireless Remote Control - DeWalt DW077 Manual De Instrucciones

All manuals and user guides at all-guides.com
CAUTION: These glasses are not ANSI approved safety glass-
es and should not be worn while operating other tools. These glass-
es do not keep the laser beam from entering your eyes.
DANGER: NEVER STARE DIRECTLY INTO THE LASER
BEAM, WITH OR WITHOUT THESE GLASSES.
Target Card
The D WALT Rotary Laser Kit includes a Laser
E
Target Card to aid in locating and marking the laser
beam. The target card enhances the visibility of the
laser beam as the beam crosses over the card.
The card is marked with standard and metric
scales. The laser beam passes through the red
plastic and reflects off of the reflective tape on the
reverse side. The magnets at the top of the card
are designed to hold the target card to ceiling track
or steel studs to determine plumb and level posi-
tions. For best performance when using the Target
Card, the D WALT logo should be facing you.
E

Using the Wireless Remote Control

The remote control allows one person to operate and setup the
laser from a distance. The remote control fea-
tures a speed/rotation button, a scan mode but-
ton, and four arrows pointing left, right, up, &
down. The speed/rotation and scan mode but-
tons operate in exactly the same way as the
speed/rotation and scan mode buttons on the
lasers control panel. The arrow buttons operate
differently depending on whether the laser is set
up in plumb or level mode
In plumb (vertical) mode, the left & right but-
tons can be used to rotate the plane of laser light
left & right. The up & down buttons operate only when the laser is
in dot mode (0 rpm's) or in scan mode. When the laser is in dot
mode, the up & down buttons are used to rotate the rotary head
and therefore move the dot up & down. When in scan mode, the up
& down buttons move the scan area up & down.
In level (horizontal) mode, the left & right buttons operate only
when the laser is in dot or scan mode. In dot mode the left & right
buttons rotate the rotary head and therefore move the dot left &
right. In scan mode the left & right buttons rotate the scan area left
& right. The up & down buttons operate the laser only when in scan
mode. The up button makes the scan area larger, and the down
button makes the scan area smaller.
Digital Laser Detector: DW0772
Some laser kits unclude a D
E
D WALT digital laser detector allows you to locate a laser beam
E
emitted by a rotary laser in bright light conditions or over long dis-
tances. The detector can be used in both indoor and outdoor situ-
ations where it is difficult to see the laser beam. The detector is not
G
F
11
WALT digital laser detector. The
A
B
C
D
H
E