Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Use the following procedure to change the saw
blade:
1.
Pull out the power plug of the machine.
2.
Put down the cable where you can see it.
3.
Put the disconnected machine on a flat
surface.
4.
Press and hold the pushbutton (9).
5.
Pull the locking lever (8) upwards.
The guard cover is unlocked and can be
➢
opened sideways. Saw shaft and
operating lever are locked automatically.
6.
Open the guard cover sideways.
7.
Using the Allen key (B), turn the flange screw
(16) counterclockwise to loosen it.
8.
Remove the flange screw (16) and the front
clamping flange (17).
9.
Remove the old saw blade.
Clamping flanges must be free of
➢
adhering parts!
The new saw blade can now be installed.
➢
16
Fig. 7: Unlocking the guard cover
Fig. 8: Opening the guard cover
Fig. 9: Removing the old saw blade
MT55cc
01/2022
Publicidad
Tabla de contenido
