Mafell MT55cc Instrucciones De Funcionamiento Y Seguridad página 17

MT55cc
10. Position the new saw blade (18) on the rear
flange (20).
Ensure that the direction of rotation is
➢
correct when you install the saw blade.
The saw teeth or the arrow on the saw
blade (18) must point in the direction of
the arrow (19) on the machine.
11. Fit clamping flange (17) and flange screw (16).
12. Using the Allen key (B), turn the flange screw
(16) clockwise to tighten it.
➢ The saw blade is secured.
13. Close the guard cover.
14. To do this, press the locking lever (8) down.
The mechanism that locks the saw shaft
➢
is activated.
The operating lever is unlocked.
➢
The saw blade is changed.
✓
01/2022
Fig. 10: Replacing the saw blade
Fig. 11: Closing the guard cover
17