Switching Off - Mafell MT55cc Instrucciones De Funcionamiento Y Seguridad

MT55cc
The table below shows the saw blade speed settings that are suitable for your application:
Material
Plastic material (styrofoam)
Plastic material (styrofoam)
Hardwood, softwood, laminated wood, wood fiber insulation material, fiber
cement board
Hardwood, softwood, laminated wood, coated panel material, fiber cement
board
Hardwood, softwood, laminated wood, coated panel material, fiber cement
board
Hardwood, softwood, laminated wood, coated panel material, soft fiber

5.4 Switching off

Use the following procedure to switch off the
machine:
1. Release the operating lever (6).
The integrated automatic brake limits the
➢
coasting time of the saw blade to approx.
5 seconds.
The switch-on lock is activated
➢
automatically and secures the hand-held
circular saw against being switched on
inadvertently.
The machine is switched off.
✓
As soon as the braking time exceeds 7 seconds, have the machine checked and a new
brake pad installed.
01/2022
Level
1
2
3
4
5
6
Fig. 14: Switching the machine off
Rotational speed
rpm
3600
4100
4700
5200
5700
6200
19