Greenlee 881 Manual De Instrucciones página 14

Assembly and Operation Instructions
881 and 881CT with 1813 Bending Table (cont'd)
22. Activate the hydraulic pump to extend the ram
approximately 14". DO NOT OVER EXTEND. Attach
the yoke to the ram positioner with the yoke pin (G).
Secure the yoke pin with a hitch pin clip (E).
23. Insert one cylinder block pin (F) into the hole marked
3" CONDUIT as shown.
Greenlee Tools, Inc.
881 and 881CT Hydraulic Benders
24 and 25. Swing the ram unit into position.
14
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070