Descrizione Connettori Pannello Anteriore (P); Schema Di Collegamento - Cebora WIN TIG AC-DC 230 M Manual De Instrucciones

3.7

Descrizione connettori pannello anteriore (P)

Pin Descrizione
1 Start digital input.
+ 5Vdc voltage output for reference current external
2
potentiometer power supply.
3-6 Arc-ON Relay contact (30Vdc 125Vac, 0,5A max).
arc lit = contact closed;
arc off = contact opened.
4 Down Digital input performs the welding current set point
reduction.
5 n.c.
7 Gnd 0V for reference current external potentiometer power
supply
8 Up digital input; performs the welding current set point
increasing
Gnd 0V for external commands
9
10 Current Ref. analog input welding current set point signal
10/33

Schema di collegamento

3301286