A
Preview of the appliance
Description of the appliance
Power supply cord
1
Control panel
2
3
Drain hose
Door
4
5
Detergent dispenser
Drum
6
Service filter
7
8
Transport hole plug
Supply hose cold water
9
NOTE
The product line chart is for reference only, please refer to
real product as standard.
4
EN
B
Using the appliance
Installation
W≥20mm
WARNING!
Installation area
• Stability is important to prevent the product from
wandering!
• Make sure that the product should not stand on the power
cord.
Before installing the machine, the location characterized as follows shall be selected:
Rigid, dry, and level surface
Avoid direct sunlight
Sufficient ventilation
Room temperature is above 0°C
Keep far away from the heat resources such as coal or gas.
WARNING!
Unpacking the washing machine
• Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
• There is a risk of suffocation ! Keep all packaging well
away from children.
Remove the cardboard box and styrofoam packing.
Lift the washing machine and remove the base packing. Make sure the small triangle
foam is removed with the bottom one together. If not, lay the unit down with side surface,
then remove the small foam from the unit bottom manually.
Remove the tape securing the power supply cord and drain hose.
Remove the inlet hose from the drum.
5
EN