Transportation And Storage; Move The Machine; Store The Machine; Troubleshooting - GreenWorks Pro GPW3001CO Manual Del Operador

6.1.2 CLEAN THE SPRAY TIP
20
18
1. Use a straight paper clip or cleaning tool (20) to clean the
spray tip.
2. Flush and clean the unwanted materials out of the spray
tip (18) with the garden hose (17).
3. Install the clean spray tip (18) back into the spray wand
(4).
18
①
②
③
Click
7 TRANSPORTATION AND
STORAGE
WARNING
Disconnect the power cord and watter supply hose before

transportation and storage.

7.1

MOVE THE MACHINE

• Point the spray wand in a safe direction.
• Only hold the machine with the handgrip.
7.2

STORE THE MACHINE

WARNING
Make sure that the spray gun, the high pressure hose and the
pump are dry.
WARNING
Make sure the machine is out of the reach of children.
English
19
Use a recommended pump protector to prevent cold
weather damage during storage in winter.
• Disconnect the garden hose from machine.
• Wind the power cord and the high pressure hose.
• Clean housing and the plastic components with a moist
and soft cloth.
• Make sure that the machine does not have loose or
damaged parts. If it is necessary, follow these steps/
instructions:
• Replace the damaged parts.
• Tighten the bolts.
• If needed, call the customer service phone number
(enter number here) for servicing instructions.
• Store the machine in a dry, isolated and frost-free area.
8

TROUBLESHOOTING

PROBLEM POSSIBLE
CAUSE
The motor does The power button
not start. is in the "OFF"
(O) position.
The power cord is
not plugged in.
Electrical outlet
does not supply
sufficient power.
The circuit breaker
is tripped.
The power switch
is on, but you do
not pull the spray
gun trigger.
13
NOTE
SOLUTION
Set the power
switch to the
"ON" ( | ) posi-
tion.
Connect the power
cord to the power
supply.
Try another elec-
trical outlet.
Let it cool, and
start the machine
again.
Pull the spray gun
trigger.
EN