Start The Machine; Stop The Machine; Thermal Relief Valve Function; Use The Quick Connector - GreenWorks Pro GPW3001CO Manual Del Operador

Soap/detergent can only be applied with this machine when
the black nozzle(75 degree) is installed.
1. Place the pressure washer upright on a flat surface.
2. Open the cap on the detergent tank (6).
3. Pour detergent into tank (6).
4. Reinstall cap.
Do not let detergent dry on the surface to prevent streaks.
4.5

START THE MACHINE

CAUTION
Do not operate without the water supply connected.
CAUTION
Before you start the machine:
1. Turn the water supply on.
2. Pull the gun trigger to release air pressure.
3. If a stable stream of water come into view, release the
spray gun trigger.
1. Connect the machine to the power supply.
2. Press down on the ON/OFF switch once to set the power
switch to the "ON" ( | ) position.
3. Turn the water supply on.
4. Pull the spray gun trigger.
4.6

STOP THE MACHINE

1. Release the spray gun trigger.
2. Press down on the ON/OFF switch, once again, to set the
power switch to the "OFF" (O) position.
5

USE THE QUICK CONNECTOR

Quick connectors
There are 7 total pieces included in the quick connector kit. These components connect to your pressure washer threaded parts
including the high pressure hose, garden hose, inlet and outlet pump parts as well as the spray gun.
NOTE
NOTE
10
English
If you do not use the machine：
• Stop the machine.
• Turn the water supply off.
• Disconnect the power cord from the outlet.
• Pull the spray gun trigger to release the remaining
pressure from the machine.
• Engage the trigger safety lock-out on the spray gun.
4.7 THERMAL RELIEF VALVE
FUNCTION
The thermal relief valve is a thermal protector for the pressure
washer pump. This pump feature will prevent water
temperatures from reaching harmful levels by releasing a
small amount of water. Opening temperature is 140°F. The
valve will reset automatically once the pump relives.
11
WARNING
EN