Chapin 62000 Manual De Uso Y Cuidado página 4

WAND ASSEMBLY
1. Make sure the o-ring is installed on the end of the wand. Insert the wand into shut-off valve.
2. Turn and tighten the retaining nut clock-wise onto the shut-off valve.
Retaining
Nut
INSTALLING THE PUMP HANDLE
The pump handle can be mounted on either side of the pump shaft (A). To
install the pump handle place the handle (C) over the shaft (A) aligning the
pump handle holes and shaft holes. Slide the bolts (B) through the aligned
holes as shown in figure 1 thru 4. Tighten nuts (D) to bolts. There are holes in
the pump handle to allow for either right (fig.5) or left (fig.6) hand mounting.
Nylon Lock Nut
Threaded Bolt
Figure 1
Figure 4
Tighten nut to bolt
Pump Handle
Positioned For
Use (right hand
shown)
Figure 7
Right Hand
Chapin Backpack Sprayer Operator's Manual - English
Wand O-ring
Figure 2
Line up holes
Figure 5
Right Hand
Shut-off
Valve
Figure 3
Slide bolts through holes
Figure 6
Left Hand
3E
A. Pump Shaft
D. Nuts
B. Bolts
C. Pump Handle